|
- Find the drive bay covers that came with your case.
(Hopefully you still have them.) Take a look at the back
of the cover and decide what you want to cut off. I like
to take off everything but the very front surface so it's
as thin as possible. Before
and After
Pictures
- Use the double-sided tape to secure the bay cover. First,
put the tape on the drive, as shown here.
Next, place the bay cover over the drive and press it
into place, as I do here.
The tape should let the cover flex enough for you to press
the eject button. You might have to glue a small spacer
on the cover if there's a gap between the cover and the
button. I used a piece of pencil eraser.
- Be sure to push the drive back far enough so that the
newly stealthed drive is flush with the front of the case.
See
an image.
See
All The Pictures
Be creative. You can cut out holes for the activity LED. This
mod also lets you have more surface area for painting your
case.
|
|
|
|
|
